Polymaker PolySupport™

PolySupport™ is a material designed to solve one of the most intimidating problem in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.

€28.88 Excl VAT
€34.66 Incl VAT

SKU: N/A Categories: ,

no more hassle

وسيط خيار ثنائي مع حساب تجريبي مجاني enter اسعار اسهم اسواق المزرعه معرفة الاسهم المملوكة لدى الافراد في الكويت ШіЩ€Щ‚ Ш§Щ„ШЈШіЩ‡Щ… Ш§Щ„ШіШ№Щ€ШЇЩЉ ШЄШЇШ§Щ€Щ„ Щ…ШЁШ§ШґШ± أفضل وسطاء الخيارات الثنائية للالولايات المتحدة الأمريكية تحميل برنامج تداول الاسهم السعودية Ш§ШіШ№Ш§Ш± Ш§Щ„Ш°Щ‡ШЁ ЩЃЩЉ Ш§Щ„ШіШ№Щ€ШЇЩЉШ© Щ„Щ…ШЇШ© ШґЩ‡Ш± توقعات تداول سعر اسهم البنك الاهلي Continue Read More Here كيف تكسب المال عن طريق الانترنت No More Hassle :  PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents.

freedom of creation

Freedom of Creation Redefined : How many times have you printed a part only to find out that either the print failed due to the lack of support, or how difficult it can be to remove the support without causing some damage to the part? We are glad to provide you with a new solution. PolySupport™ is a material designed specifically to generate support structures that are adequate to support the part being built, and yet extremely easy to remove afterwards.

single or dual extruder

Single & Dual Extruders: PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion), or as both the modelling and support material (single-extrusion). In both cases the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.

Image Gallery


Spool Specs

120 – 125 g/cm3

1.75 mm or 2.85 mm

± 0.12 mm
120 Microns
(Typical~ ± 0.1 mm )

General Printing Settings

Recommended 3D printing temperature
225 – 235 °C (Diameter of 1.75mm)
225 – 235 °C (Diameter of 2.85mm)

Recommended 3D print speed
≤50 mm/s

Recommended heated bed temperature
Not Required but for best results if equipped we recommend to set the heated bed to 60°C

Build platform
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers. You can buy this material on the BuildTak™ product page here

More details
looking for more information on PolySupport™ then you can download the Product Info Sheet.