Polymaker PolyFlex™

PolyFlex™ is a highly flexible yet easy to print 3D printing material. Featuring good elasticity and a large strain-to- failure, PolyFlex™ opens up a completely new realm of applications.

€41.28 Excl VAT
€49.54 Incl VAT

SKU: N/A Categories: ,


خيارات السماسرة الثنائية التي تقبل منا عملاء اخبار البورصه مباشر الخيارات الثنائية استراتيجية العشوائية اسعار اسهم وربه اليوم الخيارات الثنائية وسطاء سنغافورة 100 من وسطاء الفوركس استراتيجية ثابتة الخيارات الثنائية الخيارات الثنائية حساب وسيط تدوال السوق السعودي كم الجرام الذهب شراء اليوم في السعودية سعر ذهب صنع Ù ÙŠ البحرين Ù ÙŠ سوق السعودبه see enter site follow link go site منتديات سوق الاسهم السعوديه تداول Flexible : PolyFlex™ features a “Shore A” hardness of 90-95A and a large strain-to-failure of over 400%. These aren’t just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex™ gives you cool flexible parts with no worry about the part breaking. PolyFlex™ is truly your best tool for creating fun flexible parts.

plug and play

Printer Compatibility: One of our main goals when developing PolyFlex™ was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.


Flex-up Your Imagination : The soft and flexible nature of PolyFlex™ opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prosthetics…you name it. The possibilities are endless.

Image Gallery


Spool Specs

Glass Transition Temp

1.17 – 1.24 g/cm3

1.75 mm or 2.85 mm

± 0.05 mm
50 Microns
(Typical~ ± 0.02 mm )

General Printing Settings

Recommended 3D printing temperature
220 – 235 °C (Diameter of 1.75mm)
220 – 235 °C (Diameter of 2.85mm)

Recommended 3D print speed
30 – 90 mm/s

Recommended heated bed temperature
Not Required but for best results if equipped we recommend to set the heated bed to 60°C

Build platform
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers. You can buy this material on the BuildTak™ product page here

More details
looking for more information on PolyFlex™ then you can download the material’s Technical Data Sheet or Product Info Sheet.


There are no reviews yet.

Be the first to review “Polymaker PolyFlex™”

Your email address will not be published.